Specialized - 2010 P2 Cromo

Frame: P.Series Reynolds 520 Cr-Mo, double-butted Headtube/Downtube, externally relieved Headtube, disc mount, 6mm offset horizontal drop out with integrated tensioner system, replaceable derailleur hanger, disc only

Fork: Marzocchi DJ3, 80mm, Cr-Mo steerer, 32mm Cr-Mo stanchions, magnesium lower, fixed rate cartridge damping, coil/mcu with preload adj., "stiff" spring

Rear Derailleur:SRAM X-5, short cage

Shifters:SRAM X4-R, 8-speed trigger

Chainset:Fuse tubular heat treated Cr-Mo 2 piece with hollow 19mm spindle

Chainrings:34 tooth chainring with poly bash guard and Specialized ISCG chain guide

Bottom Bracket:Threaded Euro, alloy cups, 4x cartridge bearing, alloy spacers

Cassette:SRAM PG-830, 8-speed, 11-28 tooth range

Chain:KMC X8 with reusable Missing Link

Pedals:SBC Lo-A1, Alloy platform with removable pins, 9/16 inch

Front Brake: Avid BB5, mechanical disc, 160mm G2 Clean Sweep rotor

Rear Brake: Avid BB5, mechanical disc, 140mm G2 Clean Sweep rotor

Brake Levers: Avid FR-5, alloy, two-finger, linear pull

Handlebars:Specialized alloy riser bar, 55mm rise, 680mm wide, 8 degree back sweep, 7 degree up

Stem: SBC Aggro Stem, 3D forged/CNC, 4-bolt, 35mm length

Headset:Integrated cartridge bearing, Campy type, 1-1/8 inch threadless

Grips: Fuse BMX, single compound, closed end, 140mmRims:P.Disc AM, double wall disc with eyelets, 36 hole

Front Hub:Forged alloy, machined high/low flange and disc mount, 36 hole, nutted 3/8 inch axle

Rear Hub: Forged alloy cassette, machined flanges and disc mount, double sealed, ground race, 36 hole, nutted 3/8 inch axle

Spokes:2.0mm (14g) stainless

Front Tyre:Specialized Rhythm Lite Control, 26x2.3 inch, 60TPI, aramid bead

Rear Tyre: Specialized Rhythm Lite Control, 26x2.3 inch, 60TPI, aramid bead

Tubes:Schrader valveSaddle:Specialized Fuse Lo Pro, 8mm rails, PVC bumpers front and rear

Seatpost:Alloy two bolt, no offset, micro adjust, 25.4mm